ACCESSORIES

Butyl seal is a double-sided aggressive reinforced black butyl rubber tape used to join panels of polyethylene and polypropylene together by overlapping the edges and applying Butyl Seal in between. It is also used to adhere to concrete walls and footings when properly prepared. Butyl Seal is non-hardening and flexible.

Available in 2″ x 50′ and 6″ x 50′ rolls.

These full size clips are 11″ long and fit most commercial scaffolding. Dura-Clips will securely fasten your poly sheeting to scaffolding, reducing wind whip and increasing the life of your enclosure. Clips are normally placed about every 3′ onto the enclosure.

Dura-Skrim reinforced sandbags are used to secure large covers and liners to prevent wind damage. Made from Dura-Skrim 8 & 12 mil reinforced polyethylene, they are designed for a minimum life of 2 years in exposed applications. These 15″ wide x 24″ long bags will hold 35 lbs. Sandbags are available in other Viaflex reinforced materials with minimum order requirements. 11.8″ Cable Ties are available.

POUR-N-SEAL™ is a gray two part medium viscosity high strength epoxy used to seal around multiple pipe penetrations in tight areas where pipe boots are not practical, when installing VaporBlock moisture and gas barriers. (Adhesive backed 1″ weather stripping foam required—sold separately).

Protector™ Seal Tape is a single-sided clear woven tape that contains an acrylic adhesive with a release liner. It has excellent adhesion to polyethylene and the acrylic adhesive provides longer life than many competitive tapes. It is recommended for repairing and seaming polyethylene covers and liners.

Available in a 6″ x 63′ roll.

R25B Tape is a single sided aggressive synthetic elastomeric adhesive that bonds instantly to properly prepared polyethylene and polypropylene. The black polymer backing and adhesive is specially formulated to provide years of performance even in direct sunlight. A poly release liner provides for ease of installation.

Available in a 4″ x 100′ roll.

Tie-Down Buttons & Tarp Grabbers help keep plastic sheeting securely in place. Tie-Down Buttons are designed to eliminate traditional grommets in plastic sheeting up to 10 mil thick and are reusable plastic fittings that are easy to install in any position. Tarp Grabbers are up to 4 times stronger than a brass grommet and are typically used in heavier plastic sheeting from 10 mil to 30 mil thick. Great for equipment covers, large storage covers and truck tarps.

This white single-sided tape combines a heavy duty, weather-resistant polyethylene backing with an aggressive rubber adhesive. VaporBond Tape offers excellent seaming capabilities for our materials with an “Easy Tear” feature to reduce installation time. TVB4 has a WVTR of 0.18 perms per ASTM D 833. Typical applications include vapor retarders, covers and liners.

Available in a 4″ x 210′ roll.

VaporBoot Plus Preformed Pipe Boots are produced from heavy 40 mil co-extruded polyethylene and barrier resins for excellent strength and durability. The preformed boots are stepped to fit 1″ to 4″ wide pipe penetrations. VaporBoot Plus Preformed Pipe Boots are available in quantities of 12 per box.

The VaporBoot System is designed to assist in securing pipe and other penetrations that run vertically through the vapor retarder material. The VaporBoot System, made from our high performance VaporBlock® material, offers a quick solution and is delivered to the jobsite. The complete package includes 25 VaporBoots 18”x18” (with a precut center marker), 1 Roll VaporBoot (TBOOT) Tape 2”x16.4”, and 1 roll of Vapor Bond Tape (TVB4) 4”x210’.

VaporBoot Tape is a single-sided elastomeric butyl tape used to complete pipe boot installations (sealing the boot to the pipe). The 100% stretchable Butyl adhesive features excellent adhesion values and 3-D stretching that can be easily molded to multiple surfaces without any creases and folds.

Available in 2″ x 16.4′ roll.

VaporSeal™ Tape is a patented single-sided 7-layer gas barrier tape with a release liner for ease of installation. The backing contains a layer of highly impermeable EVOH designed to block migration of radon, methane and VOC’s. An aggressive acrylic adhesive provides outstanding adhesion to polyethylene over a wide temperature range. Typical uses include joining, repairing and sealing gas/moisture barriers.

Available in 4″ x 160′ and 12″ x 50′ rolls.

Viaflex Welding Rod is used for field seaming, repairs and detail work, such as installing pipe boots. Packaged in 10 lb spools, it is available in 4mm and 5mm sizes to fit most brands of extrusion guns. Viaflex Welding Rod is made from a thermally UV stabilized LLDPE resin and is available in both black and white to correspond with the color of geomembranes being utilized.